3M DBI SALA ExoFit Nex 603XS1020, Инструкция пользователя

Страница: 10 / 20

10
15
A
1
2
3
4
5
B
ONLY COMPETENT USERS SHOULD USE THIS EQUIPMENT
MANUFACTURER'S INSTRUCTIONS MUST BE FOLLOWED
FALL NOT TO EXCEED 2 METRES
AS/NZS 1891.1:2007
BMP537160
1. Pick harness up by rear D-ring and ensure there
are no tangles in the webbing. Disconnect all straps.
2. Hold the harness from behind with the shoulder
straps in each hand and don like a jacket. 3. Adjust
the shoulder straps to position the sub-pelvic strap
underneath the buttocks. Connect and adjust the leg
straps to fit snugly. 4. Fasten chest strap buckle and
adjust to fit. Connect waist belt.
DO NOT REMOVE THIS LABEL
INSPECTION LOG
D
at
e
In
iti
al
1
3
2
4
5
C
ONLY COMPETENT USERS SHOULD USE THIS EQUIPMENT
MANUFACTURER'S INSTRUCTIONS MUST BE FOLLOWED
FALL NOT TO EXCEED 2 METRES
AS/NZS 1891.1:2007
BMP537160
1. Pick harness up by rear D-ring and ensure there
are no tangles in the webbing. Disconnect all straps.
2. With arm extended to the right, hold the shoulder
straps and slip over head, connect hip buckle. 3.
Adjust front shoulder and hip buckle to position
sub-pelvic strap under buttocks. 4. Connect and
adjust leg straps to fit snugly. Ensure front D-ring is
positioned at the base of sternum.
DO NOT REMOVE THIS LABEL
INSPECTION LOG
D
at
e
In
it
ia
l
1
2
3
4
5