background image

3M, Lightvision and Crimplok are trademarks of 3M Company.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, 
but the accuracy or completeness is not guaranteed.

 

Before using this product, you must evaluate it and determine if it is suitable for 

your intended application.

 

You assume all risks and liability associated with such use.

 

Any statements related to the product which are not 

contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless 
expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability. 

This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.

 

3M MAKES NO 

OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE.

 

If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, 

to replace or repair the 3M product or refund the purchase price of the 3M product.

 

Except where prohibited by law, 3M will not be 

liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the 
legal theory asserted. 

3

Communication Markets Division

6801 River Place Blvd.

Austin, TX 78726-9000

1-800-426-8688

www.3M.com/Telecom

Please Recycle. Printed in USA.

© 3M 2013. All Rights Reserved.

78-0013-1746-6-E

3M

 Crimplok

+ Connector, Kit and Tool Descriptions

Product Number

Description

Packaging

8700-PS/APC

3M C Connector SM SC/APC, 250/900 μm (green housing) with protrusion setting tool

60/package

8700-APC

3M C Connector SM SC/APC, 250/900 μm (green housing) without tool

12/package

8700-PS/UPC

3M C Connector SM SC/UPC, 250/900 μm (blue housing) with protrusion setting tool

60/package

8700-UPC

3M C Connector SM SC/UPC, 250/900 μm (blue housing) without tool

12/package

6700-50

3M C Connector SC 50 µm MM 250/900 µm

12/package

6700-PS/50

3M C Connector SC MM 50 µm 250/900 µm w/Tool

60/package

6700-50/LOMMF

3M C Connector SC 50 µm LOMMF 250/900 µm

12/package

6700-PS/50/LOMMF

3M C Connector SC LOMMF 50 µm 250/900 µm w/Tool

60/package

6700-62.5

3M C Connector SC 62.5 µm MM 250/900 µm

12/package

6700-PS/62.5

3M C Connector SC MM 62.5 µm 250/900 µm w/Tool

60/package

8765-APC

3M C Termination SC/APC Kit

1/package

8765-UPC

3M C Termination SC/UPC Kit

1/package

2534

Fiber Optic Cleaver

1/package

-

Label for 19 mm and 24 mm cleave lengths (to retrofit 2534, No Polish Connector cleavers)

Available by contacting 3M Technical Service

1/package

8765-PS/APC 

3M C APC Protrusion Setting Tool and Fiber Holder

1/package

8765-PS/UPC

3M C UPC Protrusion Setting Tool and Fiber Holder

1/package

8765-NF/APC

3M C APC Nano Finishing Tool

1/package

8765-NF/UPC 

3M C UPC Nano Finishing Tool

1/package

6365-TH

Fiber Optic Stripper

1/package

6365-KS

Fiber and Aramid Yarn Scissors

1/package

-

3M Lapping Film, available with every connector

1/connector

8765-LFW

Lint-free Cloths

1/package

8765-CS

Cleaning Swabs

100/package

-

Water Spray Bottle, empty; only available with a kit purchase

1/package

VOL-0560R

Optional: Alcohol Bottle, empty

1/package

6365-VS

Optional: 3M 200X View Scope

CAUTION: DO NOT USE when connectors are illuminated with a laser source.

1/package

11356-00000-10

Optional: 3M

 Light Vision

 Safety Glasses with LED lights

1/package

Содержание Crimplok 8700-PS/APC



















Отзывы: