3M Touch Systems Proprietary Information
11
Setting up the monitor
5.
Follow the Setup Wizard’s on-screen instructions. The Wizard sets the
baseline for the touch screen controller, downloads linearization data to the
controller, and aligns the touch screen to the physical display.
6.
When the Wizard finishes setting up the software, an Install Successful
window appears.
7.
For more information on how to customize NFI drivers for Windows XP and
Windows 2000 operating systems, see the
NFI Touch Screen Software
System Software User’s Guide (for Windows XP and 2000)
. The guide is
available for download at www.3Mtouch.com.
Installing the drivers for Windows NT 4.0 and Windows
9X operating systems
NFI drivers for Windows NT, Windows 98, and Windows 95 are available for
download at www.3Mtouch.com. For instructions on installing and customizing
these drivers, see the
NFI Touch Screen Software System User’s Guide (for
Windows NT, 9X, 3.1., and DOS)
. The guide is available for download from
Customizing NFI touch screen drivers
The NFI touch screen driver settings that can be modified include:
!
Sensitivity of the screen to touches.
!
Access to right mouse button functions by touch.
!
Response time of the touch screen to double touches.
For instructions on how to customize touch screen settings, refer to the
NFI software user’s guide that is appropriate for your operating system. Software
guides are listed in “Related documents” on page 2.
Energy saver
The ChassisTouch 450 monitor conforms to the Video Electronics Standards
Association (VESA) Display Power Management Signaling (DPMS) standard. To
benefit from power management (or “energy saver”), the monitor must be used in
conjunction with a computer and video card that implements the VESA DPMS
standard.
Important
The ChassisTouch
TM
450 monitor ships with the linearization data pre-installed, so when
you are prompted to install the linearization file, select Skip