manualshive.com logo in svg

3M ChassisTouch 450, Руководство по установке, Страница: 15 / 39

Поделиться
Скачать
3M ChassisTouch 450 Скачать руководство пользователя страница 15

3M Touch Systems Proprietary Information

5

CHAPTER 2

Setting up the monitor

About this chapter

This chapter describes how to:

!

Mount the ChassisTouch

TM

 450 monitor in a panel to achieve a NEMA 4X/

IP66 seal around the front of the unit.

!

Connect communications cables.

!

Connect power.

!

Install Near Field Imaging

TM

 (NFI) touch screen driver software.

!

Make recommended energy saver settings if the ChassisTouch 450 monitor 
will be used in a setting where safety is an issue.

!

Test the monitor.

Mounting and connecting

Materials supplied

!

14 nylon insert hex locknuts (size M5 x 0.80)

!

14 steel washers (15 mm outside diameter)

!

1 full-scale panel cutout template

!

1 panel gasket (already installed) 

Note

: If it is ever necessary to remove the ChassisTouch from its panel 

mount and remount, be sure to install a new front panel gasket (for ordering 
information, see “3M Touch Systems support services” on page 3). Re-using 
a  panel gasket could compromise the NEMA 4X seal.

DANGER

To reduce the risks associated with fire and explosion which, if not avoided, will cause death or 
serious injury and/or property damage:

!

Do not install or use this product in a hazardous location.

Содержание ChassisTouch 450








































Отзывы:

Нет отзывов