3M Charge Analyzer 711, Руководство пользователя

Страница: 14 / 27

14
Demonstration #4 Performance of a Static Control Worksurface
1. Plug the lead (f) into the
banana jack on the conductive
container (h).
2. Hold the container by
insulating handle being careful
not to contact the sides of
the container.
3. Charge yourself up by rubbing
your feet on a non-static
flooring material and touch
the container with other hand
to charge it. Notice the level
of charge on the 3M
™
Charge
Analyzer 711.
4. Contact an ESD control worksurface with the container and observe the
voltage reduction and removal.
Note: Properly performing conductive containers must be able to quickly drain a charge from their
surface when ESD control surface.
Demonstration #5 Discharge Performance of Static Control Packaging Material
1. Place a packaging material on top of a grounded static control worksurface.
2. Charge up the conductive container as described above in Demonstration
#4 and contact the top of the packaging material with the charged container.
Observe the amount of charge draining through the packaging material on the
Charge Analyzer 711.
Note: Properly performing packaging materials must be able to quickly drain a charge from their
surface when placed on an ESD control surface.