3M C860, Руководство по эксплуатации

Страница: 16 / 32

Operation Model C860
10

3M 2003 January
System startup includes turning on the base station and each belt pack that will
be used.
To turn on the base station:
1. Slide the power ON/OFF switch to the ON position. Check to see that the
POWER indicator lights.
2. Slide the VOLUME switch to the desired position (DAY or NIGHT).
To turn on the belt pack, press the ON switch located on the belt pack. A single
tone will sound in the headset to indicate the unit has been turned on.
The system has several operating modes. The number of available operating
modes depends on the system configuration (
single-lane vs. dual-lane, standard
communication vs. duplex communication, etc. ).
In the standby mode, the belt pack is on and waiting to receive communication
from the customer or other headset operators. This mode is available with all
system configurations.
Use the talk/listen mode to talk to the customer. This mode is available with all
system configurations.
Single-Lane Standard or Duplex Communication Systems
1. A single beep alert tone sounds in the headset at 2-second intervals when the
system detects a customer (vehicle) at the menu sign.
2. When you hear the alert tone, press and hold T1 or T2 to talk to the
customer at the menu sign. Release T1 or T2 to listen.
Dual-Lane Standard or Duplex Communication Systems
In dual-lane systems, some belt packs are programmed to communicate with
Lane 1 and others are programmed to communicate with Lane 2.
1. An alert tone sounds in the headset when the system detects a customer
(vehicle) at the menu sign:
•
The alert tone for Lane 1 headsets is a single beep that repeats at
2-second intervals.
•
The alert tone for Lane 2 headsets is a double beep that repeats at
2-second intervals.
2. When you hear the single beep alert tone, press and hold T1 and talk to the
customer. Release T1 to listen.
When you hear the double beep alert tone, press and hold T2 to talk to the
customer. Release T2 to listen.
Cross-Lane Communication Systems
Communication During Peak Hours
During peak hours, the cross-lane module is turned off and the system functions
like a dual-lane duplex system. Some belt packs are programmed to
communicate with Lane 1 and others are programmed to communicate with
Lane 2.
System Startup
Turning On the Base
Station
Turning On the Belt
Pack
Operating Modes
Standby Mode
Talk/Listen Mode