background image

Table of Contents 

Model C1025

 

 

©

 3M 2006 

ii

Special Considerations .................................................................................................................. 13

 

Maintenance....................................................................................................................................14 

Transceiver Pack ................................................................................................................................... 14 

Replacing the Battery .................................................................................................................... 14 

Battery Charger ..................................................................................................................................... 15 

Location......................................................................................................................................... 15 

Cleaning the Contacts.................................................................................................................... 15 

Batteries................................................................................................................................................. 15 

Care, Handling and Storage .......................................................................................................... 15 

Battery Voltage Low Tone ............................................................................................................ 15 

Charging Batteries......................................................................................................................... 15 

Disposing of Batteries ................................................................................................................... 16 

Making Sure Batteries are Ready for Use ..................................................................................... 16 

Important Information about C1025 Rechargeable Batteries........................................................ 17 

Special Instructions for System Manager ....................................................................................17 

Programming the Transceiver Pack for Dual-Lane Cross-Lane Operation........................................... 17 

Reprogramming............................................................................................................................. 17 

Changing Channels if Interference is Heard.......................................................................................... 18 

Changing the Day/Night Switch Setting ............................................................................................... 19 

Adjusting the Monitor Speaker Volume................................................................................................ 20 

Troubleshooting..............................................................................................................................20 

Introduction ................................................................................................................................................... 20 

System Troubleshooting ................................................................................................................................ 20 

Battery and Battery Charger Troubleshooting............................................................................................... 22 

 

Содержание C1025































Отзывы: