3M C1025, Руководство по эксплуатации

Страница: 23 / 30

Model C1025 Special Instructions for System Manager
©
3M 2006
17
Keep the following information in mind as you operate the system and as
you establish operating procedures:
•
Avoid shorting across the battery contacts with metal items. Never
carry a battery in a pocket or place it in a drawer where it can
accidentally be shorted by keys, coins etc.
•
Have adequate charging capacity for the number of transceiver packs
in your system. One battery charger will handle up to three
transceiver packs. Use of more than three transceiver packs requires
an additional battery charger.
•
Batteries perform best at moderate temperatures. Extremes of heat
and cold reduce their performance.
The transceiver packs are factory programmed for single-lane operation to
enable the operator to press either T1 or T2 to communicate with lane 1.
For dual-lane cross-lane systems, the transceiver packs must also be
programmed to enable communication with either lane 1
or lane 2. With
the cross-lane module turned ON, the lane 1 or lane 2 operators can press
T1 to talk to lane 1 customers or T2 to talk to lane 2 customers.
To program the transceiver pack for dual-lane cross-lane operation:
•
While pressing and holding both the T1 and T2 switches on the
transceiver pack, turn the unit ON. Hold all three switches for at least
5 seconds. See Figure 15.
•
Audible tones will be heard in the headset earphone, indicating that
the transceiver pack is programmed for dual-lane cross-lane
operation.
Figure 15.
If you no longer need the dual-lane cross-lane feature, reprogram the
transceiver pack by repeating the above procedure.
Important Information
about C1025
Rechargeable Batteries
Programming the
Transceiver Pack for
Dual-Lane Cross-Lane
Operation
Reprogramming