3M Authentication System Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 39

3M Authentication System Скачать руководство пользователя страница 34

Travel Document Reader User Guide

DT-01715C

© 3M 2006 All rights reserved.

26

The document is not
orientated correctly on
the scanning window.

•

For details on document placement, see

Reading Documents on page 15.

The document is faulty
or non-compliant.

•

Verify the document conforms to ICAO

9303 or OCR B font requirements

The USB cable is not
connected.

•

Verify that the cable is installed.

The Ready LED is
continuously
blinking.

The system has no
USB 2.0 capability.

•

Verify that the USB 2.0 hardware is

ready. Refer to Appendix C "Check for
High speed USB"

The software is
installed incorrectly.

•

The application may already be running.

Verify that only one copy of the
application is running.

•

Remove the existing application & re-

install software. For more information
see the Software Installation section

The Sales Demo
application is not
working.

You do not have PC
Administrative rights.

•

Consult with your IT support

representative.

LEDs do not
change after
reading an RF chip

•

This is a normal condition. RF status is

displayed only on the host screen.

Reader becomes
unresponsive

Depending on the
implementation of the
PC application and the
volume of USB traffic,
AC line transients may
cause unrecoverable
errors in USB data
transmissions.

•

Restart the PC application or disconnect

and reconnect the USB plug from either
the PC or the reader.

Chipset Updating

The program

chipid.exe

is used to determine your chipset.

It is available in the install directory on your system following installation.

If the workstation uses the Intel USB chipset follow this link to locate the latest updates:
http://downloadfinder.intel.com/scripts-df-external/Support_Intel.aspx.

«
...
32
33
34
35
36
...
»

Содержание Authentication System








































Отзывы:

Нет отзывов