background image

Version: 1
This version is the sole document applicable to the product(s) since its date of publication

Removal Instructions

See Step 3 of Fitting Instructions and place hand over the 

respirator to maintain position on the face. Pull the bottom 

strap over your head. Still holding respirator in position, pull 

the top strap over your head and remove the respirator.

Disposal

Used respirators should be disposed of in accordance with 

relevant national regulations

Materials

The following materials are used in the production of the 3M

 

Aura

 Particulate Respirator 9300+ Series respirators:

Straps

Thermoplastic Elastomer

Staples

Steel

Nose Foam

Polyurethane

Nose Clip

Aluminium

Filter

Polypropylene

Valve*

Polypropylene

Valve Diaphragm

Polyisoprene

*9312+ and 9322+ models only

This respirator does not contain components made from 

natural rubber latex.

Maximum mass of products:

 

Unvalved (9310+, 9320+) = 10 gm

 

Valved (9312+, 9322+) = 18 gm 

Storage and Transportation

The 3M

 Aura

 Particulate Respirator 9300+ Series 

respirators have a shelf life of 5 years. End of shelf life is 

marked on the product packaging. Before initial use, always 

check that the product is within the stated shelf life (use by 

date). Product should be stored in clean, dry conditions within 

the temperature range: –20°C to +25°C with a maximum 

relative humidity of <80%. When storing or transporting this 

product use original packaging provided.

3M New Zealand Limited

94 Apollo Drive

Rosedale, Auckland 0632

TechAssist Helpline: 0800 364 357

Customer Services: 0800 252 627

www.3M.com/nz/ppesafety

3M Australia Pty Ltd

Bld A, 1 Rivett Road

North Ryde NSW 2113

Phone: 136 136 (select option 2)

TechAssist Helpline: 1800 024 464

Email: [email protected]

www.3M.com/au/ppesafety

Personal Safety Division

© 3M 2016. All rights reserved.

Please recycle.

3M, Cool Flow and Aura are trademarks 

of 3M Company.

AV011453816 

Warning

Selection of the most appropriate respiratory protective equipment (RPE) will depend on the particular situation and should be made only by a 

competent person knowledgeable of the actual working conditions and the limitations of RPE. Details regarding performance and limitations are 

set out in this technical bulletin as well as on the respirator packaging and user instructions. Before using any respirator, the wearer must read and 

understand the user instructions for the product. Specific legislation must be observed. If in doubt, contact a safety professional or 3M.

Important Notice

To the extent permitted by law, 3M shall not be liable for any loss or damage including any loss of business, loss of profits, or for any indirect, 

special, incidental or consequential loss or damage arising from reliance upon any information herein provided by 3M. Nothing in this statement 

will be deemed to exclude or restrict 3M’s liability for death or personal injury arising from its negligence.

3M

 Personal Safety Division  |  3M

 Particulate Respirators 9300+ Series 

Содержание Aura 9300+ Series

Страница 1: ...ot humid environments and or where work is hard and physical 9312 9322 Even strap pressure improves comfort on the neck face and head with a secure feel Coloured headbands for easy identification Yellow for P1 Blue for P2 Standards The 3M Aura Particulate Respirator 9300 Series respirators meet the Class P1 or P2 performance requirements of AS NZS 1716 2012 for filtering mechanically P1 and therma...

Страница 2: ...y Before initial use always check the product is within the stated shelf life use by date It is recommended that fit testing be conducted before assigning a respirator to an individual If you cannot achieve a proper fit then do not enter contaminated area See your supervisor Inspect respirator before each use to ensure it is in good working condition Examine all the respirator parts for signs of d...

Страница 3: ...ne hand may result in less effective respirator performance use two hands 6 The seal of the respirator on the face should be fit checked before entering the workplace Fit Check 1 Cover the front of the respirator with both hands being careful not to disturb the fit of the respirator 2 a UNVALVED respirator EXHALE sharply b VALVED respirator INHALE sharply 3 If air leaks around the nose re adjust t...

Страница 4: ...ct use original packaging provided 3M New Zealand Limited 94 Apollo Drive Rosedale Auckland 0632 TechAssist Helpline 0800 364 357 Customer Services 0800 252 627 www 3M com nz ppesafety 3M Australia Pty Ltd Bld A 1 Rivett Road North Ryde NSW 2113 Phone 136 136 select option 2 TechAssist Helpline 1800 024 464 Email techassist mmm com au www 3M com au ppesafety Personal Safety Division 3M 2016 All ri...

Отзывы: