3M™ AT9000 MK2 Full Page Reader User Guide
Maintenance
The demo application is not
working.
The software is installed
incorrectly.
The application may already be running.
Verify that only one copy of the application
is running.
Remove the existing application & re-install
software. For more information see the
Software Installation section
You do not have PC Administrative
rights.
Consult with your IT support
representative.
LEDs do not change after
reading an RF chip
This is a normal condition. RF status is
displayed only on the host screen.
Reader becomes
unresponsive
Restart the PC application or disconnect
and reconnect the USB plug from either
the PC or the reader.
USB peripherals attached to
the reader do not power on or
do not function correctly
You need to use the external
power supply when attaching
external devices
Verify the AC power source.
Verify that the AC cable is connected to the
AC power source.
Verify that the power cable is connected to
the power supply port located on the back
panel.
Copyright 2018 IDScience Inc. Rev. 20180725
