background image

SECTION 8: LIMITED WARRANTY

Limited Warranty:  

3M Purifi cation Inc. warrants this Product to be free from defects in material and workmanship during normal use for the warranty period set forth below. The warranty 

period commences from the date of purchase. This warranty does not cover failures resulting from abuse, misuse, alteration or damage not caused by 3M Purifi cation Inc. or failure to follow 
installation and use instructions. No warranty is given as to the service life of any fi lter cartridge, membrane, or media as it will vary with local water conditions and water consumption. 

3M PURIFICATION INC. MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE OF TRADE.  

If the Product is found defective within the warranty period, your exclusive remedy and 3M Purifi cation Inc.’s sole obligation shall be, at 3M Purifi cation Inc.’s option, to replace or repair the 
Product or refund the purchase price of the Product. This warranty does not cover labor. The remedy stated in this paragraph is Customer’s sole remedy and 3M Purifi cation Inc.’s exclusive 
obligation.

Warranty Period:

•  One (1) year on the entire product unit
•  Five (5) years on the media tank only (does not include internal component parts)
•  Five (5) years on the control valve
•  Five (5) years on salt storage container and components*

Limitation of Liability:

  3M Purifi cation Inc. will not be liable for any loss or damage arising from this 3M Purifi cation Inc. product, whether direct, indirect, special, incidental, or conse-

quential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.  Some states and countries do not allow the exclusion or limitation of incidental 
or consequential damages, so the above limitation or exclusion may not apply to you.  

Warranty Claims:

To obtain warranty service, call 1-877-238-9119 or mail your request to: 3M Purifi cation Inc., 400 Research Parkway, Meriden, CT 06450.  Proof of purchase (original sales receipt) must 
accompany the warranty claim, along with a complete description of the Product, model number and alleged defect. 

This warranty gives you specifi c legal rights, and you may have 

other rights which may vary from state to state, or country to country.

* Water Softeners only

3M is a trademark of 3M Company.
Aqua-Pure is a trademark of 3M Company used under license.
© 2012 3M Company.  All rights reserved.

3M Purifi cation Inc.

400 Research Parkway
Meriden, CT 06450
1-800-222-7880
www.3Mpurifi cation.com

Содержание Aqua-Pure CS Series

























Отзывы: