26
2009 February
200a-NA
12.9
TROUBLE SHOOTING GUIDE
12-OPERATION
PROBLEM
When pressing the ON button, the
machine does not start.
The magnetothermic protection
opens the main switch.
Drive belts do not convey boxes.
Drive belts do not turn.
CAUSE
The lockable emergency stop
button is pressed.
Short circuit in the electrical system.
Motor under stress.
Thermal cut-out not at correct
amperage setting.
Narrow boxes.
Worn drive belts.
Top taping head does not apply
enough pressure.
Taping head applying spring holder
missing.
Taping head applying spring set
too high.
Worn or missing friction rings.
Drive belt tension too low.
Electrical disconnect.
Circuit breaker not at correct
setting.
Motor not turning.
CORRECTION
Release the emergency stop
button.
Check the electrical system.
Check that the drive belts are not
blocked.
Set the correct amperage.
Check machine specifications.
Boxes are narrower than
recommended, causing slippage
and premature belt wear.
Replace drive belts.
Adjust the box height adjustment
with the crank.
Replace spring holder.
Reduce spring pressure.
Replace friction rings.
Adjust belt tension.
Check power and electrical plug.
Set to correct current value.
Evaluate problem and correct.
12.9 Trouble Shooting Guide
PROBLEM
CAUSE
CORRECTION
PROBLEM
CAUSE
CORRECTION
When pressing the ON button
the machine does not start
The magnetothermic protection
opens the main switch
Drive belts do not convey
boxes
Drive belts do not turn
The lockable emergency stop
button is pressed
Motor under stress
Thermal cut-out not at correct
amperage setting
Narrow boxes
Worn drive belts
Taping head applying spring
holder missing
Taping head applying spring
set too high
Worn or missing friction rings
Drive belt tension too low
Electrical disconnect
Circuit breaker not at correct
setting
Motor not turning
Release the emergency stop
button
Check the electrical system
Check that the drive belts are
not blocked
Set the correct amperage
Check machine specifi cations
Boxes are narrower than
recommended, causing
slippage and premature belt
wear
Replace drive belts
Adjust the box height adjust-
ment with the crank
Reduce spring pressure
Replace friction rings
Adjust belt tension
Check power and electrical
plug
Set to correct current value
Evaluate problem and correct
12-OPERATION
(continued)
(continued on next page)
Содержание 3M-Matic AccuGlide 3 200a
