3M 3M-Matic AccuGlide 2+ 800af, Инструкция и перечень запасных частей

Страница: 41 / 106

31
Figure 11-7 – Box Size Set-Up
Figure 11-8 – Box Size Set-Up
Figure 11-7
Place a product fi lled box 55 to 65mm [2-1/4 to
2-1/2 inches] into the exit end of the machine with
the top
fl aps folded as shown.
Crank the upper head down until it just contacts the
top of the box.
Crank the side drive belts in until the belts fi rmly grip
the box.
Figure 11-8
Set Kicker cam relative to length of box being
sealed. Measure the distance "X" as shown and set
the cam to the same dimension measured on the
box (this dimension provides a good starting point
for setting the kicker cam).
Note:
5mm hex key wrench is supplied with
machine and should be kept in wrench
holder on side of upper frame.
2010 December
800af-I-NA
11 - OPERATION
(continued)
55 to 65mm
[2 1/4 to 2 1/2 in]
Infeed
End
"X"
5mm Hex Key