3M 3M-Matic 700r3, Инструкция и перечень запасных частей, Страница: 28 / 144

18
6.1 Uncrating
The envelope attached to the shipping box contains
the uncrating instructions of the machine
(Figure 6-1).
Cut straps. Cut out staple positions along the
bottom of the shipping box (or remove staples
with an appropriate tool
) Figure 6-2).
After cutting out or removing the staples, lift the
shipping box in order to clear the machine
(two persons required).
Transport the machine with a fork-lift truck
to the operating position. Lift the pallet at
the point indicated in
Figure 6-3
(weight of m pallet =
See
Section 4-Specif i cations
).
2012 January
700r3-NA
6-UNPACKING
6.2 Disposal of Packaging Materials
The
700r3
package is composed of:
- Wooden pallet
- Cardboard shipping box
- Wooden supports
- Metal
fi xing brackets
- PU foam protection
- PP plastic straps
- Dehydrating salts in bag
- Special bag of laminated polyester/aluminium/
- Polyethylene (sea freight package only)
- Polyethylene protective material
For the disposal of the above materials, please follow
the environmental directives or the law in your country.
Figure 6-1
Figure 6-2
Figure 6-5
Figure 6-3
Figure 6-4
Removal of Pallet
Using a 10mm combination wrench, remove the
fasteners that secure the case sealer legs to pallet
at each leg (as shown in
Figure 6-4).
A package is located under the machine body.
Retrieve the instruction manual for additional
procedures of the set up. The package also
contains parts removed for shipping, spare parts
and tools
(Figure 6-5).