manualshive.com logo in svg

3M 3M-Matic 700a, Инструкция и перечень запасных частей, Страница: 15 / 122

Поделиться
Скачать
3M 3M-Matic 700a Скачать руководство пользователя страница 15

5 

3-SAFETY

2011 June

700a-NA 

3.1  General Safety Information

Read all the instructions carefully before starting 
work with the machine; please pay particular atten-
tion to sections marked by the symbol: 

The machine is provided with a LATCHING EMER-
GENCY STOP BUTTON 

(Figure 3-1)

; when this 

button is pressed, it stops the machine at any point 
in the working cycle. Maintain clear access to power 
cord while machine is operating.   Disconnect plug 
from power source before machine maintenance

 

(Figure 3-1).

  Also disconnect air if the machine has 

a pneumatic system.  Keep this manual in a handy 
place near the machine. This manual contains infor-
mation that will help you to maintain the machine in 
a good and safe working condition.

3.2   Explanation of Signal Word and

     Possible Consequences

Indicates a potentially hazardous 
situation, which, if not avoided, 
may result in minor or moderate 
injury and/or property damage.

CAUTION

:

Indicates a potentially hazardous 
situation, which, if not avoided, 
could result in death or serious 
injury and/or property damage.

WARNING:

This safety alert symbol identi

fi

 es 

important messages in this manual.
READ AND UNDERSTAND THEM 

BEFORE INSTALLING OR 

OPERATING THIS EQUIPMENT.

Figure 3-1

Содержание 3M-Matic 700a



























































































































Отзывы:

Нет отзывов