English - 6
TROUBLE SHOOTING:
Symptom
Action
Liner does not collapse or collapses
Check air inlet connection and pressure to gun/cup.
slowly
Check that air supply port on gun to cup is not plugged.
Check that air supply port at base of cup is not plugged.
Check cup air supply hose connection from gun to cup.
Check that retaining collar shroud assembly is tight.
Check that safety relief valve at base is in place.
Air leaking at retaining collar shroud
Check that retaining collar shroud assembly is tight.
assembly
Verify or adjust cup pressure not to exceed a maximum
operating pressure of 10 psi (69 kPa 0.69 Bar).
Fluid dripping from PPS™ cup
Check that retaining collar shroud assembly is tight
Check that PPS™ gun adapter is fully engaged with
lid spout.
Verify or adjust cup pressure not to exceed a maximum
operating pressure of 10 psi (69 kPa 0.69 Bar).
Air leaking at base of cup
Check that safety relief valve at base is in place
Verify or adjust cup pressure not to exceed a maximum
operating pressure of 10 psi (69 kPa 0.69 Bar).
Cup air supply hose slips off air supply
Trim off ends or replace air supply hose PN 16123.
port at base of cup or gun regulator
GB
