3Jtech NetCAMit, Руководство пользователя

Страница: 6 / 13

http://www.3jtech.com.tw
http://www.pnpipcameras.com
netCAMit User’s Guide
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
6
2.2 Illustration
No. in
Figures
Name on
netCAMit
Description Remark
1
RJ45 network
connector
To connect to the camera and
Ethernet port via RJ45 cable
Refer to section 2.2.1 for front
panel information
2
RJ22 power
supply connector
To connect to the camera and
power adaptor via RJ22
interface
Refer to section 2.2.1 for front
panel information
3
Lens 300k pixels CMOS sensor
Refer to section 2.2.1 for front
panel information
4 RFIO slot
To install the optional RFIO
device
Refer to section 2.2.1 for front
panel information
5 SW_1
Press SW_1 button, then
netCAMit will perform the
power reset
N/A
6
SW_2
Press and hold SW_2 button
for 5~10 seconds to reset the
camera to its factory defaults
The green indicator LED of RJ45
port will light when it is finished
with the reset procedure
7
Camera
information
Serial number, camera ID and
firmware version
Refer to section 2.2.2 for real
panel information
2.2.1 Front Panel Information
RJ45 Network Connector
netCAMit is designed for 10/100Mbps Ethernet networks. netCAMit connects to the network via
category 5 cable.
RJ22 Power Supply Connector
netCAMit adopts unique RJ22 cable for power supply. The special featured RJ22 cable includes
Input / Output (I/O) function. Simply connect the Input / Output cable to the desired device and no
hardware jumper fixing on camera is required.
Lens
netCAMit box includes a standard 60° wide angle lens fixed to the camera. Other types of lens are
also available upon request. Please note that different price may apply to different lenses.