Ver 1.0.0.1
Since 1988
3
5.
Software Connection Settings for EDGE Mode Only
Before the setup, please confirm that the LAN port of EDGE Super Router has been connected
with the PC via RJ45. Initiate your Internet Explorer and type in
http://192.168.8.1
into IE
browser to enter the setup page of EDGE Super Router. Also input
“admin”
as the user name
as well as the password, and refer to the following sections to set up your EDGE Super Router:
Modem Settings
1) Once you are in the setup, please select “
3G Setting
” item in “
Basic Setting
” section of the
setup.
2) In HSUPA Settings page, please select your desired operation mode upon the SIM card
inserted. (Default is 3G + 2G (3G Preferred))
3) Please contact your ISP for the 2G/3G online settings. The user must enter
PPP User Name
,
PPP Password
, and
Access Point Name (APN)
for your EDGE Super Router.
4) Click on
Apply
after completing the setup.
DDNS Settings (if necessary)
1) Go to the
http://www.dyndns.com/
or
http://www.no-ip.com/
website to apply for a free DDNS
account, DDNS password and DDNS domain name for your EDGE Super Router.
2) Select “
DDNS Setting
” item in “
Basic Setting
” section of the setup. Fill in DDNS account,
DDNS password and DDNS domain name you had applied accordingly. Thus, you will be
allowed to access your EDGE Super Router with this domain name when its IP address has
been changed.
3) Click on
Apply
after completing the setup.
Please ask your ISP for
required information
