3i Corporation Pegasus NX, Руководство пользователя

Страница: 24 / 126

11
Important Information: First Communication Path & Second
Communication Path
First Communication Path
The first communication path includes: GPRS, Wi-Fi and Ethernet. Pégasus Nx sends event(s) received
from the alarm panel to the Zeus Server via first communication path (if first communication path is
selected as the operation mode). In the first communication path, telephone acts as a backup.
In the first communication path, Pégasus Nx preferably attempts to transmit events through GPRS, Wi-Fi
and Ethernet. In case of failure like GPRS, Wi-Fi and Ethernet down, Zeus Server unavailable or
connection timeout with many retries, it switches to second communication path which gives the
telephone line back to the alarm panel. If any cut off is found in the telephone line, then Pégasus Nx waits
for 30 seconds in addition to the configured delay time, if the telephone line is not restored within this
time, then the events are transmitted through CSD data call or SMS or GSM voice call using DTMF for
sending events, and tone detection by op-amp circuits for receiving ACK.
Second Communication Path
The second communication path is telephone. Pégasus Nx sends event(s) received from the alarm panel
to the Zeus Server via second communication path (if the second communication path is selected as the
operation mode).
In the second communication path, Pégasus Nx first gives the telephone line to the alarm panel. If any
failure (line cut off) occurs, then the events are transmitted through GPRS, Wi-Fi or Ethernet. Here, the first
communication path is telephone, and the second communication path is GPRS, Wi-Fi and/or Ethernet. In
the second communication path, the first communication path acts as a backup.
2. In the Control Inputs drop-down box, select an input to control operation mode. You can select input 1/3 or 2/4.
To restrict the input mode, in the Inputs drop-down box, select the Disable option.
How to Configure the 3i Locate Section?
3i Locate allows you to locate the location of Pégasus Nx using Google Map . To configure and use this
function, the GSM/GPRS interface must be enabled.
To configure the “3i locate” section
1. Enable 3i Locate .
2. In the Frequency text box, enter the frequency duration in minutes.