3G Cardio Pro Runner, Руководство пользователя

Страница: 19 / 26

17
www.3GCardio.com
CARDIO
3G
®
3G
CARDIO
®
18
It is important to take good care of your treadmill deck (the walking surface underneath the
belt). A good silicone lubrication will also improve the performance of your treadmill.
NOTE:
Use the silicone that is supplied with the treadmill. Additional silicone lubricant can
be purchased from your retail store.
WARNING: STOP
the treadmill and remove the safety key before lubricating the running
deck.
A). Find the silicone bottle. It is located in the hardware kit package included with this
treadmill.
B). Find a straw and put it onto the silicone bottle as the drawing shows.
C). Spray silicone evenly on treadmill deck as the drawing shows. (ATTENTION : The
treadmill MUST BE STOPPED before applying the silicone lubricant. This is to prevent
injury, otherwise the edge of the running belt may cut you or your fingers could be
crushed by the rollers. )
Do not put too much silicone on the deck. Excessive lubricant may cause slippage of the
HOW TO SPRAY SILICONE ON DECK?
LUBRICATION MAINTENANCE
A C
STRAW
Put on straw
B
Silicone bottle
SPRAY AREA
LUBRICATION MAINTENANCE:
It is important to take good care of your treadmill deck (the walking surface underneath the belt). Using a 100% pure
silicone lubrication will also improve the performance of your treadmill by reducing the heat and friction that occur
during workouts.
NOTE
: Use the silicone that is supplied with the treadmill. Additional silicone lubricant can be purchased from your
retail store.
WARNING : STOP the treadmill and remove the safety key before lubricating the running deck.
HOW TO APPLY SILICONE ONTO THE TREADMILL DECK:
1. Locate the silicone bottle. It is located in the hardware kit package included with this treadmill.
2. Cut the very tip of the applicator shaft with a pair of scissors.
3. Apply the silicone evenly on the treadmill deck as the drawing shows. The application area is only in the area
where your feet make contact with the deck. This typically is the middle 2/3rds of the deck area. Do not put too
much silicone on the deck. To apply the silicone, lift the belt up with your fingers and reach the silicone bottle as
far underneath the belt as you can and squeeze a small amount onto the deck. Repeat the same procedure from
the opposite side of the belt to reach the other portion of the deck. Slowly work your way down the treadmill deck.
You only need to apply a little lubrication in each spot. After completing the lubrication, it is recommended to now
do a workout as the heat and friction from the belt will help spread the lubrication around to the rest of the deck
area and absorb into the underside of the belt.
CAUTION : Excessive lubricant may cause the silicone to leak onto the floor and may make the treadmill belt slippery.
17
It is important to take good care of your treadmill deck (the walking surface underneath the
belt). A good silicone lubrication will also improve the performance of your treadmill.
NOTE:
Use the silicone that is supplied with the treadmill. Additional silicone lubricant can
be purchased from your retail store.
WARNING: STOP the treadmill and remove the safety key before lubricating the running
deck.
A). Find the silicone bottle. It is located in the hardware kit package included with this
treadmill.
B). Find a straw and put it onto the silicone bottle as the drawing shows.
C). Spray silicone evenly on treadmill deck as the drawing shows. (ATTENTION : The
treadmill MUST BE STOPPED before applying the silicone lubricant. This is to prevent
injury, otherwise the edge of the running belt may cut you or your fingers could be
crushed by the rollers. )
Do not put too much silicone on the deck. Excessive lubricant may cause slippage of the
HOW TO SPRAY SILICONE ON DECK?
LUBRICATION MAINTENANCE
A C
STRAW
Put on straw
B
Silicone bottle
SPRAY AREA
LUBRICATION MAINTENANCE
Underside of Belt
Lubrication Area