3DUpFitters Prusa i3 Enclosure Kit, Руководство по установке, Страница: 31 / 33

If you'd like to lower the temperature further, you can always buy a more powerful fan,
but the easiest thing to do is crack the front door a little to increase airflow. But won't
that let out all of the volatile organic compounds coming o
ff the hot end? The key is
the negative pressure combined with the particles' minimal and light.
As you can see, the fan keeps the air flowing in and the harmful particles floating into
the vent or filter.
3D Printer Design Matters
The other part of the equation is the printer design. Those printers where the hot end is
at the top of the enclosure make it easier to achieve higher temperatures because the
hot air rises to the top, and the vertical hot end position is fixed. Those printers with
the hot ends at the bottom will always have more problems managing temperature
simply because the temperature is more likely to vary as the hot end goes from the
bottom to the top of the enclosure.
Copyright 2023 3DUPfitters LLC 31