Starting Out
This tool gets very hot!
You should never directly touch the gold metal tip of the 3Doodler
during or directly following use.
Try tracing two-
dimensional designs first. This will allow you to get used to the tool’s speed and
flow before moving on to three-dimensions.
Secondary tools like scissors, wire cutters or even small pliers are helpful for handling and
finishing designs. We’ve included some in the kit.
Consider having additional consumable materials like cardboard or cardstock on hand to take
3D designs to the next level!
Project Ideas
3Doodler’s website has many projects with detailed photos, instructions, and even printable
designs for tracing with the 3Doodler. Find them here:
http://the3doodler.com/community
Troubleshooting
If you experience problems, please contact the Reference Desk at
.
Feedback
We would love to hear how your experience was! Please complete this survey:
http://goo.gl/forms/CuU9efutyX
Also, feel free to share photos or videos of your creations with us on social media:
https://www.facebook.com/wclibrary.info
https://twitter.com/washcentlibrary
This Maker Kit was made possible through a grant from:
