page
10
... print your plane | www.
3DLabPrint
.com
option B Factory files Simplify3D (recommended):
We prepared all you need in these files (FFF process settings, parts layout on bed, etc...)
You can use these settings as a start point. Adjust according to your need (adapt for your
printer), print single parts and so on... Most 3d printers should work just with these settings,
but please go through the settings and amend if necessary, we are not liable for any damage
resulting from using our settings. If this still does not work for you, please proceed to the
next option.
option C Simplify3D manual setting (watch and learn):
Use our
for proper setting... this
is very good option and you will learn a lot about Simplify3D and become an 3d printing
expert.
Remember: We use 0 retraction with LW-PLA.
AND... please watch our VideoGuides:
Simplify3D setting
about Thin Wall Printing (normal PLA)
