![background image](http://html.mh-extra.com/html/3disc/heron-ios/heron-ios_user-manual_442192041.webp)
Page 41
5.4.5
Bite Alignment
The Heron™ IOS enables you to carry out
Automatic Bite Alignment
based on the
previously scanned Maxillary and Mandibular arches.
Note
: When you select Bite Alignment, allow a few seconds for the arch scans to
load.
1.
Carrying Out An Automatic Bite Alignment
The Automatic Bite-Alignment feature enables the 3D software to
automatically recognize the patient’s maxillary and mandibular arches
based on a brief scan of a segment of the patient’s bite in occlusion.
Scan Molar/Pre-Molar
Segments
For the HeronClinic™ to
automatically recognize
the Mandibular and
Maxillary arches, it is
recommended you:
1.
Scan lengthways along a
tooth and 3-4mm of gingiva
in the molar/pre-molar
region
2.
Angle the scanner tip
to take in as much of the gingiva as possible.
Once the scanned bite segment locks,
the initial
maxillary and mandibular scans are overlayed
and a green checkmark displays, indicating you
are finished scanning that segment.
3.
You will be invited to repeat for the
opposing side.
For a better scanning experience, it is recommended to
first position the
scanner in the fully open patient mouth
and then ask the patient to
perform a bite.
Содержание Heron IOS
Страница 1: ...IOS FPM 71 001 3 1_EN User Manual Version 3 4 x ...
Страница 3: ......
Страница 54: ...Page 54 User Manual 4 Select the desired options 5 Click Save to save selected View Notification settings ...
Страница 68: ...Page 68 User Manual INMETRO Certification Mark Ukraine Conformity Mark ...