User Manual
FireID
TM-501-EN
15
Operating Instructions
Before an imaging plate is scanned from a FireCR Dental reader that is connected to a router
through an Ethernet cable, the imaging plate should be tagged on the
in order to identify the
target PC. If the imaging plate is not tagged on the , the scanner will not begin to scan. The
imaging plate must be tagged. When a tagged imaging plate is scanned from a FireCR Dental
reader, the target PC will receive the scanned image, imaging plate size information and the serial
number of the imaging plate.
If the PC is connected to a new FireCR Dental reader or a new PC is added to an existing FireCR
Dental reader, the PC will download the calibration data from the FireCR Dental reader
automatically.
Figure 6. Typical configuration of Network Sharing Mode
Operating procedure:
1.
Tag the image plate on the
of the target PC by briefly touching the imaging plate onto
the topside of the .
2.
Put a protective cover on the imaging plate and insert both into a hygienic bag.
3.
After exposing the plate, remove hygienic bag and protective cover and dispose of them.
4.
Put the imaging plate on the tray of the FireCR Dental reader and push the tray in to
scan.
5.
The scanned image is transferred to the target PC along with the serial number of the
imaging plate.
D
ANGER
This equipment is indoor use only and all the communication
wirings are limited to inside of the building.