3DCPI 3DCPI-03, Руководство для стартапов

Страница: 23 / 38

3DCPI-03
START-UP GUIDE
parameters to match the size
of your printouts, too big too
small
will causing the
abnormal feeding。
Retract the filament when the
nozzle is moving over a
none-printed area, the speed
is about 80~100, distance
base on actual situation.
Amount of retraction when
switching
nozzle with
dual-extrusion.
A thicker bottom layer makes
sticking to the bed easier. Set
to 0.0 to have the bottom
layer thickness the same as
the other layers。
Sinks the object into the platform, this can be used for objects
that do not have a flat
bottom and thus create a
too small first layer.
Add a certain amount of
overlapping extrusion on
dual-extrusion
prints.
This bond the different
colors better together.
Speed at which travel moves are done, too high travel speed
can cause some machines miss steps then.