Step-by-Step Build Guide (cont’d)
3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 5� -
Step 8.2 Install Motor, ESC, and Receiver
8.2.1 Screw the motor to the Motor Mount using the M4 x 16mm Long Screws
and M4 locknuts. The locknuts are inserted into the sides of the motor
mount as shown in the rendering below.
8.2.2 Install the ESC and receiver. Use velcro with adhesive backing to attach
the ESC and receiver to the fuselage tray, out of the way of where you
will place the battery. Install the 6” servo extensions to the two ports on
the receiver that you will use to mix the aileron servos together. If you
do not having mixing capabilities on your receiver you can use a Y-harness
servo extension. You will also need a
for
one of
the elevator
servos if you can not mix the two elevator servos
together.
