1
GRAVITY INTRODUCTION
Thank you for purchasing the 3D Systems Gravity 3D Printer, auxiliary SLS equipment, and 3D Systems materials! Before
you start printing parts with your process facility, please read this guide carefully to enjoy optimum process performance
and longer equipment service life. The Gravity is a commercial, precision tool intended for use in the additive manufacture
of end-user supplied designs from polymeric powders. The final performance characteristics of fused powder may vary
according to your compliance with the instructions for use, design guidelines, application, operating conditions, material
combined with, end-use, or other factors. Use the Gravity and Aurora
®
materials to produce parts with superior mechanical
properties, resolution, surface finish, and edge definition compared to other processes. Ensure repeatable, consistent, tool-free
manufacturing and produce durable functional parts faster with this mid-size production 3D printer.
Copyright and Corporate Identity
Aurora PA11
®
with regard to printers is a registered trademark of 3D Systems. Aurora PA11 Food Grade
®
with regard to
materials is a registered trademark of 3D Systems. Aurora PA12
®
with regard to printers is a registered trademark of 3D
Systems. Aurora TPU
®
with regard to printers is a registered trademark of 3D Systems. Aurora PP
®
with regard to printers is a
registered trademark of 3D Systems.
Improvements
3D Systems may (but shall not be obligated to) make improvements to this document from time to time. However, the Licensed
User acknowledges that at any time after the expiration of the date of issuance, 3D Systems may institute a periodic charge or
fee payable by the Licensed User in return for ongoing receipt of improvements. It is the responsibility of the Licensed User
to provide 3D Systems with current information as to its name and address. The Licensed User also undertakes to notify 3D
Systems promptly in the event that it considers any of the data contained in this document to be incomplete or erroneous in
any respect, in connection with the Licensed User's particular or general use.
FCC Notice
United States
Class 1 Laser Product Statement of CDRH Compliance - This product conforms to the applicable requirements of 21 CFR,
Subchapter J at the time of manufacturer.
Statement of FCC Compliance - This product complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions; (1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Korea
3D Systems, Inc.
1
p/n 74-D001, Rev. A