manualshive.com logo in svg

3D Systems wematter Gravity, Руководство пользователя, Страница: 17 / 29

Поделиться
Скачать
3D Systems wematter Gravity Скачать руководство пользователя страница 17

6.2  Remove Your 3D-Printed Models

Wear Protective Mask: Use personal safety equipment when handling the powder to avoid inhalation and

unwanted spreading of powder.

Hot Surface: Beware that the temperature inside the powder cake and of printed objects may still be elevated.

Never touch the heating elements in the roof of the build chamber.

Remove your 3D-printed components while vacuuming up loose powder in the chamber. Beware not to vacuum up

components with the vacuum cleaner. Place your 3D prints in the provided container.
Post-process the 3D prints with The Density, please see the separate manual.

 

 

 

6.3  Clean the Build Chamber

CAUTION: Only use the supplied equipment or approved equipment for cleaning and handling the powder.

When using the proper equipment you will not get electrical discharges that can be painful and can damage

the product.

Industrial Vacuum

Supplied By: Customer

Installed By: Supplier

Follow the below steps to evacuate the powder and clean the build chamber:

1. Clean the build chamber with the supplied powder vacuum cleaner. Do not forget to vacuum the powder return slot to the

left in the chamber.

2. Clean the top of the recoater:

a. Click the “Middle” button on the WeMote to move the recoater to the middle of the chamber.

WARNING: KEEP OUT OF THE CHAMBER WHEN THE RECOATER MOVES.

b. Vacuum loose powder from the top of the recoater cover plate.

3. Check the recoater blade edge for possible irregularities or fine particles. Irregularities should be removed with a Cleaning

Wipe and AirGlow Machine Cleaner. If that does not help, lightly use Scotch-Brite along the blade.

3D Systems, Inc.

14

p/n 74-D001, Rev. A

Содержание wematter Gravity






























Отзывы:

Нет отзывов