15
40-D043 Revision C 5-May-17
The iPro 8000/9000 SLA Center was designed with safety in mind; however, improper use and
malfunctions can cause injury. To prevent unsafe operation, the iPro 8000/9000 SLA Center
automatically shuts down immediately if it detects an unsafe condition.
Follow these general safety guidelines when operating your iPro 8000/9000 SLA Center:
• Read and follow system instructions.
• Follow all safety rules in this section and heed all cautions and warnings in this guide.
• Do not attempt to open the chamber door or windows while a part job is running.
• Do not use any material without first reviewing its
Material Safety Data Sheet (MSDS)
• Dress power and communication cables at the back of the iPro 8000/9000 SLA Center to
prevent tripping.
• Do not attempt to access, service, or adjust the internal components.
• Do not attempt to perform any maintenance procedures unless you have been specifically
trained to do so.
• Operators are trained to operate the system and to perform all the necessary tasks to build a
part.
• Certified service personnel have completed the 3D Systems service training package and are
certified to perform service tasks. Certification may occur at various levels and servicers should
only perform tasks that they are authorized and certified to complete.
• Do not ignore warning signs that are posted during service operations.
