3D Systems Duraform ProX PA Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 30

background image

1

3D SYSTEMS, INC

.

1

LEGAL NOTICES

COPYRIGHT AND CORPORATE IDENTITY

COPYRIGHT

© 2022 by 3D Systems, Inc. All rights reserved. This document is subject to change without notice. The 3D Systems logo is a

registered trademarks of 3D Systems, Inc. This document is copyrighted and contains proprietary information that is the property

of 3D Systems. The licensed user, in the name of whom this document is registered (the “Licensed User”) does not have the right

to copy, reproduce, or translate this document in any way or to any media without the prior written consent of 3D Systems. No

copies of the document may be sold or given to any person or other entity.

LIMITATIONS OF WARRANTY AND LIABILITY

This information is provided by 3D Systems for the convenience of its customers. It is believed to be reliable, but NO

REPRESENTATIONS, GUARANTEES OR WARRANTIES OF ANY KIND ARE MADE AS TO ITS ACCURACY, FITNESS FOR A PARTICULAR

USE OR THE RESULTS TO BE OBTAINED THEREFROM. The information is based in whole or in large part on laboratory work and

does not necessarily indicate performance in all conditions. Notwithstanding any information provided by 3D Systems or its

affiliates, the customer remains fully responsible for determining which federal, state or local laws or regulations, or industry

practices are relevant to activities in which it engages, as well as assuring that those laws, regulations or standards are complied

with under actual operating conditions, and 3D Systems undertakes no responsibility in these areas.
IN NO EVENT WILL 3D SYSTEMS BE RESPONSIBLE FOR DAMAGES OF ANY NATURE, INCLUDING SPECIAL OR CONSEQUENTIAL

DAMAGES, RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. THE CUSTOMER ASSUMES ALL RISK RESULTING

FROM THE USE OF THIS INFORMATION.
Customers use of the materials that follow is an acknowledgment of its agreement to the foregoing. Any customer not wishing to

be bound should return this material to 3D Systems. Nothing contained herein is to be considered as permission, recommendation,

nor as an inducement to practice any patented invention without permission of the patent owner.

TRADEMARKS AND REGISTERED TRADEMARKS

DuraForm is a registered trademark and ProX is a trademark of 3D Systems, Inc.

«
...
2
3
4
5
6
...
»

Содержание Duraform ProX PA































Отзывы:

Нет отзывов

Похожие инструкции для Duraform ProX PA

Бренд: Malyan Страницы: 9

Бренд: DataCard Страницы: 8

Бренд: DataCard Страницы: 8

Бренд: DataCard Страницы: 3

Бренд: Oki Страницы: 56

Бренд: Oki Страницы: 36

Бренд: Oki Страницы: 150

Бренд: Oki Страницы: 28

C9600hnColorSignage

Бренд: Oki Страницы: 20

C9600hnColorSignage

Бренд: Oki Страницы: 125

Бренд: Oki Страницы: 20

Бренд: Oki Страницы: 205

Бренд: Oki Страницы: 47

Бренд: Oki Страницы: 49

Бренд: Xante Страницы: 31

Бренд: Oki Страницы: 32

Бренд: Canon Страницы: 60

ValueJet VJ-628X

Бренд: MUTOH Страницы: 90

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды