3D Systems CUBE, Быстрый старт

Страница: 22 / 32

19
NOTE: If Auto Gap is not successful, it is
recommended that you perform Auto Level
and Auto Gap again. Select AUTO LEVEL to
continue.
NOTE: If Auto Gap is not successful the
second time, select PLATE MAINTENANCE .
For more information, refer to the section titled
PRINT PAD MAINTENANCE. Once the PLATE
MAINTENANCE procedure has been performed,
perform Auto Level and Auto Gap.
NOTE: If Auto Gap is still not successful, select
MANUAL GAP ADJUSTMENT . Refer to the
section titled Manual Gap Adjustment for more
information. Once the Manual Gap Adjustment
has been performed, note the final reading for
future reference.
26. Select PRINT .