3D Platform
WorkSeries 200, 300 & 400 Manual
Revision: C
Date: December 28, 2017
3dplatform.com
• 3DP
-DOC-005 (12-2017)
33
Appendix 5: Service Schedule
Weekly Service Items
Mechanics
Check bed with dial indicator
Re-align actuators
Clean and wipe IVT rails with 3-in-1 oil
Check motor couplings, oil with 3-in-1 (to reduce noise) or tighten screws if needed
Extruders
Check extruder heat block for tightness
Check PLA and EXT fans for function
Check hob for material build up
Use canola oil to treat both nozzles
Ensure wiring is neat, tie up if necessary
Controller settings
Check babystep with chip prints
Check tool offsets (if planning on running dual extrusion prints)
Run bed probe cycle (Duet only)
General cleanup
Clean print bed from adhesive buildup
Remove print debris from channels around bed (vacuum if necessary)
