3D Platform
WorkSeries 200, 300 & 400 Manual
Revision: B
Date: December 28, 2017
3dplatform.com
• 3DP
-DOC-005 (12-2017)
21
Removing a Completed Print
1.
When print completes, the machine will generally
beep to notify the operator (settings dependent).
2.
After print completes, bed and extruder will still be
hot. Wait for bed and extruder to completely cool
down before removing print.
Warning:
Attempting to remove print while bed is
hot may result in damage to the machine.
3.
Often during the cooling cycle,
a print will “pop” off
the bed, else use a tool such as a razor scraper or
putty knife to gently work underneath the edge of
the print to release it from the glass build plate. Do
not touch the glass print surface with bare hands
even when cool, as finger oils can cause adhesion
problems on subsequent prints.
4.
When print is removed, use a scraper or putty knife
to remove any additional debris such as skirt, brim,
or plastic from build area.
