3D innovations DeskCycle Скачать руководство пользователя страница 13

Страница: 13 / 16

Care and Maintenance

Care

• Make sure the pedals are as tight as you can possibly make them. This is especially important

if you pedal backwards. If the pedals come loose, you should apply

Blue Loctite®

to the pedal

threads. See the “Troubleshooting” section for details.

• Do not stand on the pedals. The DeskCycle was not designed to be used while standing.

Maintenance

The DeskCycle requires no maintenance.

Do Not Lubricate

The DeskCycle contains sealed bearings for years of maintenance-free use. No lubrication is needed.

Some lubricants contain chemicals that can actually harm the bearings.

Support (US Customers)

Support (Outside of the US)

The best place to look for answers is the DeskCycle website www.DeskCycle.com.

If you don’t find what you’re looking for, feel free to call or email us with your questions or

suggestions.

TOLL-FREE:

877-426-3292

EMAIL:

[email protected]

The support contact link for your country can be found on the

Contacts

page at,

www.3dinnovations.com

Содержание DeskCycle
















Результаты поиска

Содержание DeskCycle

Отзывы:

Похожие инструкции для DeskCycle

Бренды по названию

Популярные бренды

3D innovations DeskCycle, Руководство пользователя

Результаты поиска

Содержание DeskCycle

Отзывы:

Похожие инструкции для DeskCycle

Бренды по названию

Популярные бренды