3Com VCX V7122, Руководство по установке

Страница: 23 / 58

Assigning an IP Address Using the CLI 23
9 Restore your PC’s IP address and subnet mask to what they originally
were. If necessary, restart your PC and re-access the V7122 via the
Embedded Web Server with its new assigned IP address.
Assigning an IP
Address Using the
CLI
To assign an IP address using the CLI, perform these steps:
1 Enable the Embedded Telnet Server:
a Access the V7122 Embedded Web Server (see Accessing the
Embedded Web Server ).
b Set the parameter Embedded Telnet Server (under Advanced
Configuration > Network Settings > Application Settings ) to
Enable (Unsecured) .
c Reset the gateway. On the main menu bar, click the Maintenance
button; the Maintenance Actions screen appears. From the Burn to
FLASH drop-down list, select Yes , and then click the Reset button;
the V7122 is shut down and re-activated. A message about the
waiting period is displayed. The screen is refreshed.
2 Use a standard Telnet application to connect to the V7122 Embedded
Telnet Server.
3 Login using the username (Admin) and password (Admin).
4 At the prompt type conf, and then press Enter; the configuration folder
is accessed.
5 To check the current network parameters, at the prompt, type GCP IP,
and then press Enter; the current network settings are displayed.
6 Change the network settings by typing: SCP IP [ip_address]
[subnet_mask] [default_gateway] (e.g., SCP IP 10.13.77.7
255.255.0.0 10.13.0.1 ); the new settings take effect on-the-fly.
Connectivity is active at the new IP address.
This command requires you to enter all three network parameters (each
separated by a space).
7 To save the configuration, at the prompt, type SAR , and then press
Enter; the V7122 restarts with the new network settings.