3Com TokenLink Velocity TokenLink VelocityTM XL PCI Network Interface..., Руководство пользователя

Страница: 84 / 124

5-4 C
HAPTER
5: IBM E
NVIRONMENTS
3 Select Install .
You are prompted for the source of the NIF file.
4 If you are using diskettes, insert TokenDisk
diskette #2 in a drive (for example, drive A)
and enter:
a:\ndis2\os2
If you are using the TokenDisk CD, insert it in the
CD-ROM drive (for example, drive D) and enter:
d:\ndis2\os2
5 When the Installation Complete message appears,
select OK .
You are returned to the main menu.
6 Select Configure in the MPTS dialog box.
7 In the Configure panel, verify that LAN Adapters and
protocols is preselected, and then select Configure at
the bottom of the panel.
8 In the Configure panel in the Network Adapters
group box, select 3Com TokenLink Velocity XL PCI
and click ADD .
You can edit parameter settings for the 3C359 NIC. Select
the 3C359 NIC in the Current Configuration list box and
click
Edit . When you are finished with the parameter
settings, click OK .
9 In the Protocols list box, select the protocols used by
your network application. Select each protocol and
click
ADD .
If you are not sure which protocols to use, select IBM
IEEE 802.2 and IBM OS/2 NetBIOS protocol drivers or ask
your network administrator.
The protocol drivers you have selected will appear under
the NIC driver name in the Current Configuration list box.
You can edit parameter settings for the protocols. Select a
protocol and then click
Edit .
10 When you have finished selecting and editing
protocols in the Configuration panel, click OK .
11 Click Close in the Configuration panel.
Book Page 4 Saturday, November 1, 1997 3:13 PM