3Com TokenLink 3C359B, Руководство пользователя

Страница: 86 / 124

5-6 C
HAPTER
5: IBM E
NVIRONMENTS
Adding the MS-DLC Network Protocol for
Windows for Workgroups
Follow the steps in this section to add the Microsoft MS-DLC
network protocol to the Windows for Workgroups Add
Network Protocol list for the 3C359 NIC. The MS-DLC
protocol is required for connectivity between your PC and an
IBM host computer.
Before proceeding, make sure that you have the Microsoft
MS-DLC network protocol available. If the MS-DLC
protocol is not currently available, download it from the
Microsoft Web site to a temporary storage location on your
PC’s hard disk or on a diskette.
1 In the Windows for Workgroups Program Manager
window, double-click the Network icon.
2 In the Network window, double-click the Network
Setup icon.
3 In the Network Setup window, click Network Drivers .
4 In the Network Drivers window, make sure that 3Com
TokenLink Velocity XL PCI Adapter is displayed. Click
Add Protocol .
5 In the Add Network Protocol window, select Unlisted
or Updated Protocol . Click OK .
6 In the Install Driver window, enter the path for the
MS-DLC protocol. If the protocol is stored on diskette,
insert the diskette in the drive. Click
OK .
7 In the Unlisted or Updated Protocol window, select
MS-DLC . Click OK .
The Network Driver window is displayed.
8 Verify that the MS-DLC protocol is displayed under
3Com TokenLink Velocity XL PCI Adapter . Click Close .
The Network Setup window is displayed.
9 Click OK .
The MS-DLC files are copied, and the Network
Setup window displays a message indicating that the
AUTOEXEC.BAT, SYSTEM.INI, and PROTOCOL.INI files
have been modified.
Book Page 6 Saturday, November 1, 1997 3:13 PM