3Com TokenLink 3C359B, Руководство пользователя

Страница: 33 / 124

Installing a DOS 16-Bit Client Driver 3-3
3 If you are using the 3.5-inch diskettes, insert
TokenDisk diskette #1 in the drive and enter:
a:
If you are using the TokenDisk CD, insert it in
the CD-ROM drive and enter the drive letter.
For example:
d:
4 Enter:
autolink
An AutoLink information window is displayed.
5 From the AutoLink Information window, press Enter.
The first time you use AutoLink, the 3Com software
license appears.
6 To accept the terms and conditions, enter:
y
To view the full text of the license agreement, press F1.
7 When the information window appears, press Enter
to continue.
A status message appears, followed by a prompt for the
ring speed of your network.
8 Enter the ring speed.
9 When the auto installation process is finished,
remove the TokenDisk diskette or TokenDisk CD and
restart your PC.
The login prompt for a NetWare server appears.
10 Log in to the NetWare server with your ID and
password.
Your PC is now configured as a NetWare DOS ODI client.
If you experience problems using AutoLink, see the
next section, “AutoLink Troubleshooting.” If you cannot
connect to the NetWare server after running AutoLink, see
Chapter 6, “Troubleshooting.”
Book Page 3 Saturday, November 1, 1997 3:13 PM