3Com Switch 4500 Family, Руководство по началу работы, Страница: 79 / 134

Upgrading from the Command Line Interface 79
Directory of unit1>flash:/
15367 KB total (10215 KB free)
2 You can check the contents of the flash for the remaining units in the
fabric by entering:
dir unit2>flash:
dir unit3>flash:
dir unit4>flash:
dir unit5>flash:
dir unit6>flash:
dir unit7>flash:
The file list should contain one of each file type (
.zip, .def, .cfg
and
.app
).
3 Any additional files should be considered for deletion to allow maximum
space for downloading the new files. To delete a file from the list enter:
delete/unreserved unit1>flash:/ filename
To delete files from the list for the remaining units in a fabric, replace
unit1
with
unit2
(on the next line) and so on for each Switch in the
fabric.
4 The
/unreserved
option will cause the file to be deleted from both the
flash and the recycle-bin. To check that deleted files have been removed
from the recycle-bin, enter the following:
reset recycle-bin unit1>flash:/
If the recycle-bin is empty the following is displayed:
% File can’t be found “unitN>flash:/”
To check that deleted files have been removed from the recycle-bin for
the remaining units in a fabric, replace
unit1
with
unit2
and so on for
each Switch in the fabric.
0 -rw- 714784 Apr 02 2005 01:36:16 s3p03_01_00.zip
1 -rw- 11043 Apr 02 2005 01:37:17 3ComOScfg.def
2 -rw- 11427 Apr 02 2005 00:01:01 3ComOScfg.cfg
3 -rw- 4529259 Apr 02 2005 01:39:57 s3n03_01_00s168.app