3Com Switch 4500 Family Скачать руководство пользователя страница 19

Страница: 19 / 134

Switch 4500 — Front View Detail

RPS LED (3CR17571-91 and 3CR17572-91 only)

Green

AC and RPS supply connected.

Yellow

AC failed or not connected. RPS supply is OK.

Off

There is no RPS supply connected.

10BASE-T/100-TX Port LEDs

Speed Green

A high speed (100 Mbps) link is present, blinking off for
every packet received or transmitted.

Yellow

A low speed (10 Mbps) link is present, blinking off for every
packet received or transmitted.

Yellow Flashing

The port has failed POST.

Off

No link is present.

Duplex (3CR17571-91 and 3CR17572-91 only)

Green

Full duplex, blinking off for every packet received or
transmitted.

Yellow

Half duplex, blinking off for every packet received or
transmitted.

Yellow flashing

The port has failed POST.

Off

No link is present.

PoE (3CR17571-91 and 3CR171572 only)

Green

Power is being delivered to the port.

Green flashing

Port power has exceeded limit or is unable to supply power
due to unit being over budget.

Yellow

PoE error, no power supplied on port.

Yellow flashing

The port has failed post.

Off

No power is being delivered.

1000BASE-X SFP Port LEDs

Speed Green

A high speed (1000 Mbps) link is present.

Yellow Flashing

Port failed POST.

Off

No link is present.

Duplex (3CR17571-91 and 3CR17572-91 only)

Green

Full duplex packets are being transmitted/received on the
port.

Yellow

Half duplex packets are being transmitted/received on the
port.

Yellow flashing

Port failed POST.

Off

No link is present.

LED

Color

Indicates

Содержание Switch 4500 Family







































































































































Результаты поиска

Содержание Switch 4500 Family

Отзывы:

3Com Switch 4500 Family, Руководство по началу работы, Страница: 19 / 134

Результаты поиска

Содержание Switch 4500 Family

Отзывы: