21
Table 17
Route Policy View
[4500]
route-policy
Table 18
RIP View
[4500]
rip
stp port priority
Configure the priority of the current Ethernet port
Port -> Spanning Tree Per
Port
stp root-protection
Enable Root protection
Port -> Spanning Tree Per
Port
stp transmit-limit
Set the maximum number of STP packets the
current port can send within one Hello time
Port -> Spanning Tree Per
Port
unicast-suppression
Configure the limit to unknown unicast flooding
voice vlan enable
Enable the Voice VLAN features on the port
wred
Configure WRED parameters
Command
Description
Web Command
apply cost
Configure the route cost value of route information
if-match
Configure the IP address range to match the Route-
policy
if-match cost
Configure one of the match rules of route-policy to
match the cost of the routing information
if-match interface
Configure to match the route whose next hop is
designated interface
if-match ip next-hop
Configure one of the match rules of route-policy on
the next hop address of the routing information
Command
Description
Web Command
checkzero
Perform the checkzero operation in the zero field of
RIP-1
default cost
default routing cost of an imported route
host-route
Enable receiving host-routes
import-route
Import routes from other protocols into RIP
network
Enable the routing protocol on the related network
or interface
reset
Reset RIP configuration
summary
Enable RIP-2 automatic route summarization
timers
Config RIP timers
DQA1756-1AAA01.fm Page 21 Tuesday, September 13, 2005 10:08 PM
