3Com SUPERSTACK 3 4500, Краткое руководство пользователя

Страница: 12 / 22

12
radius nas-ip
Specify the source address of the RADIUS packet
sent from NAS
radius scheme
Specify RADIUS configuration information and enter
the RADIUS view (See
Table 12, “RADIUS Server
Group View,” on page 17 )
return
Return to user view from any view other than user
view
rip
Enable RIP and enter RIP view (See Table 18, “RIP
View,” on page 21 )
rmon alarm
Add an entry to the alarm table
rmon event
Add an entry to the event table
rmon prialarm
Add an entry to the extended RMON alarm table
route-policy
Specify a route policy and enter route policy view
(See
Table 17, “Route Policy View,” on page 21 )
rsa local-key-pair create
Create local RSA host key pair and server key pair
rsa local-key-pair destroy
Remove all RSA key pairs at the server, including
host key pair and Server key pair
rsa peer-public-key
Enter the public key view (See Table 8, “Public Key
Edit View,” on page 15 )
set unit name
Set the unit name of specified unit
sftp server enable
Enable SFTP Server
snmp-agent community
Configure community access name and access to
SNMP Administration -> SNMP ->
Community String
snmp-agent group
Configure an SNMP group Administration -> SNMP ->
Group
snmp-agent local-engineid
Configure a name for a local or remote SNMP
engine on the Switch
snmp-agent mib-view
Create or update the view information
snmp-agent packet max-size
Specify the size of an SNMP packet
snmp-agent sys-info
Configure system information of running SNMP
snmp-agent target-host
Configure destination of SNMP notification Administration -> SNMP ->
Traps
snmp-agent trap enable
Enable/disable the device to send Trap messages Administration -> SNMP ->
Traps
snmp-agent trap life
Configure the timeout of Trap packets
snmp-agent trap queue-size
Configure the information queue length of Trap
packets sent to the destination host
snmp-agent trap source
Configure the source address for sending Trap
packets
snmp-agent usm-user
Configure users in an SNMP group Administration -> SNMP ->
Users
ssh2
Establish one telnet connection
ssh client assign rsa-key
Assign the client RSAKey
ssh client first-time enable
Set SSH client attribute of authenticating user for
the first time access
DQA1756-1AAA01.fm Page 12 Tuesday, September 13, 2005 10:08 PM