7
EUROPE
–
R
ESTRICTIONS
F
OR
U
SE
O
F
2
.4GHZ
F
REQUENCIES
I
N EUROPEAN
C
OMMUNITY
C
OUNTRIES
n
This device may be operated
indoors
or
outdoors
in all countries of the European Community
using the 2.4GHz band: Channels 1 – 13, except where noted below.
n
In
Italy
the end-user must apply for a license from the national spectrum authority to operate this
device outdoors.
n
In
Belgium
outdoor operation is only permitted using the 2.46 – 2.4835 GHz band: Channel 13
n
In
France
outdoor operation is only permitted using the 2.4 – 2.454 GHz band: Channels 1 – 7
EUROPE
–
R
ESTRICTIONS
F
OR
U
SE
O
F
5
GHZ
F
REQUENCIES
I
N EUROPEAN
C
OMMUNITY
C
OUNTRIES
Allowed
Frequency
Bands
Allowed Channel
Numbers
Countries
5.15-5.25GHz
36, 40, 44, 48
Austria
5.15-5.35GHz
36, 40, 44, 48, 52, 56,
60, 64
Cyprus, Czech Republic, France,
Hungary, Slovakia
5.15-5.35 &
5.470-5.725GH
z
36, 40, 44, 48, 52, 56,
60, 64, 100, 104, 108,
112, 116, 120, 124,
128, 132, 136, 140
Belgium, Bulgaria, Denmark, Estonia,
Finland, Germany, Greece, Iceland,
Ireland, Italy, Latvia, Liechtenstein,
Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland,
Portugal, Slovenia, Spain, Sweden,
Switzerland, U.K.
n
This device may be not be operated outdoors when using the bands 5150-5350MHz (Channels 36,
40, 44, 48, 52, 56, 50, 64).
n
In Italy the end-user must apply for a license from the national spectrum authority to operate this
device outdoors.
To remain in conformance with European spectrum usage laws for Wireless LAN operation, the above
5GHz channel limitations apply. The user should check the current channel of operation. If operation is
occurring outside of the allowable frequencies as liste d above, the user must cease operating the
3Com 11a/b/g PCI Card
at that location and consult the local technical support staff responsible for the
wireless network.
The 5GHz Turbo mode feature is not allowed for operation in any European Community country
n
This device must not be operated in ad -hoc mode using channels in the 5GHz bands in the
European Community. Ad-hoc mode provides a direct communication between two client devices
without a Wireless LAN Access Point.
n
This device must be used with Access Points that have employed and activated a radar detection
feature required for European Community operation in the 5GHz bands. This device will operate
under the control of the Access Point in order to avoid operating on a channel occupied by any radar
system in the area. The presence of nearby radar operation may result in temporary interruption in
communications of this device. The Access Point
’
s radar detection feature will automatically
restart operation on a channel free of radar. You may consult with the local technical support staff
responsible for the wireless network to ensure the Access Point device(s) are properly configured
for European Community operation.
