Figure 3-7 SSH Client login interface (in RSA authentication mode)
After you have entered the correct username, you can perform the SSH connection. If
a passphrase was used when generating the keys, the passphrase is also required
before a successful SSH connection can be achieved.
Note:
The key generator may be different, depending on the SSH Client configuration interface. For the
detailed operation, please refer to the use guide of the SSH Client or the online help.
As shown in Figure 2-3, the console terminal (SSH Client) has set up a local
connection with Router. Run the SSH1.5-enabled client software on the terminal for
the sake of safer data and information communications.
SSH Client
Router
Networking for the SSH local configuration
In this section, the configuration procedures for different login authentication types will
be covered. However, before you can proceed to any procedure, you must perform
the following operation:
[3Com]
rsa local-key-pair create
3Com Router Configuration Guide Addendum for V1.20
40
