3Com Router 3030, Руководство по выпуску

Страница: 8 / 8

6 C
HAPTER
1: 3C
OM
R
OUTER
6000/3000 DSL F
AMILY
R
ELEASE
N
OTES
S
OFTWARE
V 2.01
■
The SNMP Trap enable default is incorrectly documented. All traps are enabled
when the snmp-agent command is executed
■
Firewall ASPF UDP detection does not support the following UDP based
applications: TFTP, SSH, DHCP.
■
Named access list is documented but not supported. Named access list is not
supported in this release
■
ACL numbering scheme is different from that documented. The following is
the corrected numbering scheme:
1000-1099(Interface-based ACL)
2000-2099(Basic ACL)
3000-3099(Advanced ACL)
4000-4999(Ethernet Frame Header ACL)
■
The Command Reference Manual states that
reset ike sa
will clear both
phase 1 and phase 2 security associations.
reset ike sa
will only clear phase 1 security associations; “reset ipsec sa” will
clear phase 2 security associations
■
MPLS LDP loop detect cannot be configured after LDP is enabled on interface.
An error is reported. Enable LDP loop detect under system view before enabling
LDP on the interface.