3Com Router 3030, Руководство по выпуску

Страница: 7 / 8

MPLS 5
■
Frame Relay Congestion Control BECN/FECN does not function. Disable IP Fast
Forwarding on the interface if Frame Relay Traffic Shaping is selected.
■
Frame Relay Traffic Shaping is Inactive on interfaces that use Frame Relay Traffic
Shaping. Disable IP Fast Forwarding on the interface if Frame Relay Traffic
Shaping is selected.
■
QoS with ip fast forwarding doesn't work properly. Disable ip fast forwarding.
MPLS
■
If you ping a CE Router from a PE Router within an MPLS/BGP L3 network there
will be no response. Use the command
ping -vpn -a xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
, using the source address of the PE interface that is in the
VPN of the intended target.
■
If Loopback0 and LSR ID ip addresses are different, MPLS LDP will not work
properly. Match Loopback0 and LSR ID ip addresses
Documentation Errors
■
Command Reference Manual' IS-IS section text is:
“When the cost type is “narrow”, its range is 1 through 63; when the cost type
is wide, its range is 1 to 16777215.”
Text Correction: “When the cost type is “narrow”, its range is 0 through 63;
when the cost type is wide, its range is 0 to 16777215.”
■
The Router 6000 Family uses the frame relay terminology Cir Allow and Cir,
instead of Cir and MinCir respectively. Please refer to the following documents:
'3Com Router Command Reference Manual' page 1033. '3Com Router
Configuration Guide' page 1019
Text Correction: Use CIR Allow when configuring the maximum Committed
Information Rate for the DTE when no network congestion exists. Use CIR as
the value to which the DTE will adjust when network congestion exists
■
Command manual example results in an error: “snmp-agent local-engineid
12345”
Text Correction: The command requires the user to enter a string of 5 to 32
octets of hexadecimal characters for the SNMP engine ID. Ex: 0102030405
■
The
virtualbaudrate
command is non-existent in the Command Index.
Use the “virtualbaudrate” command in the CLI.
[6080-3-Serial2/0/4]virtualbaudrate?
300 only for async mode
600 only for async mode
1200 for syn & asyn mode
2400 for syn & asyn mode
4800 for syn & asyn mode
9600 for syn & asyn mode
19200 for syn & asyn mode
38400 for syn & asyn mode
56000 only for syn mode
57600 for syn & asyn mode
64000 only for syn mode
72000 only for syn mode
115200 for syn & asyn mode
128000 only for syn mode
384000 only for syn mode
2048000 only for syn mode