3Com Router 3012 Скачать руководство пользователя страница 44

Страница: 44 / 63

Configure the NTP server mode

Configure the NTP peer mode

Configure the NTP broadcast server mode

Configure NTP broadcast client mode

Configure NTP multicast server mode

Configure NTP multicast client mode

I. Configure NTP Server Mode

This task sets a remote server as the local time server by specifying its address

X.X.X.X

which represents a host address. This must not be a broadcast

address, or multicast address, or the IP address of the reference clock. In this case,

the local router is working in client mode. It is up to the local client rather than the

remote server to synchronize its clock with that maintained by the remote server.

Perform the following configuration in system view.

Table 4-1 Configure NTP time server

Operation

Command

Configure NTP time server

ntp-service unicast-server X.X.X.X [ version number | authentication-keyid
keyid | source-interface {

{

interface-name | interface-type } interface-number }

priority ] *

Disable the NTP server
mode

undo ntp-service unicast-server X.X.X.X

NTP version is in the range of 1 to 3 and defaults to 3. The authentication key ID is

in the range of 1 to 4294967295. You can specify an interface by specifying its

interface-name

interface-type interface number

. The local router will use the IP

address of the interface as the source IP address carried by the NTP messages sent

to the time server. In addition, you can specify the time server as the preferred time

server by specifying

priority

II. Configure the NTP peer mode

This task is to set the remote server at X.X.X.X as the peer of the local router. In this

case, the local router is running in symmetric active mode.

X.X.X.X

represents a host

address, which must not be a broadcast address, or multicast address, or the IP

address of the reference clock

With this approach, the local router can synchronize

its clock with the one maintained by the remote server while the remote server is also

allowed to synchronize its clock with the one maintained by the router.

Perform the following configuration in system view.

3Com Router Configuration Guide Addendum for V1.20

Содержание Router 3012
































































Результаты поиска

Содержание Router 3012

Отзывы:

Похожие инструкции для Router 3012

Бренды по названию

Популярные бренды

3Com Router 3012, Руководство по настройке

Результаты поиска

Содержание Router 3012

Отзывы:

Похожие инструкции для Router 3012

Бренды по названию

Популярные бренды