Standby/Primary server switchover interval
The shared key for the AAA negotiation between the router and
Server
Set the timeout time waiting for a server to make a response
Specify a source IP address for all the packets to be transmitted
2.4.1 Create a server group
Before a server can be used to implement AAA, you should first create a
server group and put the server into the group. The router will
look up the group for a server to implement AAA. You can create a
maximum of 11 server groups.
Perform the following configuration in system view.
Table 2-2 Create a server group
Operation
Command
Create a server group
by specifying its name
hwtacacs-server template template-name
Delete a server group
by specifying its name
undo hwtacacs server template template-name
By default, no server group is configured.
2.4.2 Add a Server into a Server Group
After a server group is created, you add servers into it. Each
group allows of a maximum of 5 servers.
Perform the following configuration in view.
Table 2-3 Add/Delete servers
Operation
Command
Add a server into a
server group
host ip ip-address [ port port-number ] [ response-timeout time ]
[
shared-key key-string ] [ authen-primary | author-primary |
account-primary ]
Remove a server from
a server group
undo host
ip
ip-address [ authen-primary | author-primary |
account-primary ]
By default, no Server is specified.
3Com Router Configuration Guide Addendum for V1.20
20
